|
Post by brad on Nov 6, 2023 10:23:49 GMT -6
I have a few large thick bronze and copper round washers in my stash. So I decided to make pendent with them. This is the first, about 1.75" long. I first ran it through my rolling mill enough to stretch it into an oval shape, then textured it, and put a bonus/surprise on the backside. I also put a very slight curve on it for. (to pair with some of these oval pendents, I hope to buy small washers and do same, for ear rings.) *While things in the pickle or between all the annealing, I pulled stuff out of the gardens! brad
|
|
|
Post by DawninCal on Nov 6, 2023 11:51:34 GMT -6
Nicely done, Brad! I really like the shape you achieved after putting it through the rolling mill and the curve is a nice tough as well. The textured surprise on the back is an unexpected bonus. Did you etch/engrave the designs on the front of it too? Dawn
|
|
|
Post by brad on Nov 6, 2023 12:24:44 GMT -6
Thank you. The left/front pic is hammered. The back/right view is just some quick stamping. In New Mexico, I observe that many of the Navojo and Hopi, and others that do metalsmithing will often do a little something on the backs underneath side of cuffs, and other jewelry. I saw one cuff in a gallery in Santa Fe that was heavily detailed equally and the outside and inside of a cuff with engraving. Amazing for something that will never be seen on one side. I believe the gallery had about 6500.00 on the piece. Brad
|
|
|
Post by caeterle on Nov 6, 2023 13:04:01 GMT -6
The back of pieces has been a topic here before as well. I love if a piece looks good on both sides because it tells me that the creator has put their attention into ALL of it, not just what you see at first glance.
I really like that hammered look, nice work, and I would absolutely love to discover the detail on the back when picking this up for the first time.
|
|
|
Post by DawninCal on Nov 6, 2023 14:33:18 GMT -6
Ooops, my bad! I had the front and back mixed up. I do agree that paying attention to the back shows a level of care and attention to detail that many artists skip. My painted pendants almost always have a tiny little painting on the back in keeping with the theme of the larger miniature on the fronts. I also initial and date them. Exception being if the painting is mounted in a bezel as there's no way to add initials/tiny painting. In that case, I choose or make a bezel that has an interesting/pretty back side. Dawn
|
|
|
Post by caeterle on Nov 6, 2023 14:44:23 GMT -6
And that's what I so love about your painted pendants. As some of you may remember, I have two pendants that Dawn made for me, of my Merlin and Meffi. I asked her to keep the back a secret, that is between Merlin, Meffi, Dawn, and myself
|
|